103
You can also select the following Display Options:
Additional information that appears on the Manage Check-In
window includes:
• Status of check-in process such as Active
• Number of stations that have checked in
• Number of stations that have not yet checked in
• Number of vacant stations
• Date and time check-in started
• If check-in has been manually stopped or is done.
Red Not checked in
Gray Check-in is not expected because the station
is either on the vacant or excluded lists.
Table 6-2, Check-In Display Options
Show Vacant When enabled, stations in the Vacancy List
appear in the color-coded display.
Show Excluded When enabled, stations in the Exclusion List
appear in the color-coded display.
Show Name When enabled, the station’s name appears
along with the station’s extension number.
Displaying the name is useful if you are not
sure where a station is located when only the
extension number is displayed.
Show Not
Checked In Only
Note: Show Vacant and Show Excluded
options are disabled when this option is
selected.
When enabled, only the stations that have
not checked in are listed. This option may be
preferable if a large number of stations are
managed by your Nyquist server, and you
want to quickly view which stations have not
checked in.
Table 6-1, Color-coded Check-In Status (Continued)
Color Status
To Next Page
Loading...
Need help?
General