45
Step 3 On the Announcement page, use the Zones drop-down
menu to select the zone where the announcement will
play.
Step 4 Select the announcement that you want to launch.
Step 5 If you must enter a password to complete this task,
select Dial Pad and enter the 4-digit password.
Step 6 If prompted, enter 1 for confirmation.
Step 7 To end the announcement, select Stop.
Step 8 You can also stop an announcement by performing the
following steps:
aUnder Tones/Announcements, select Stop
Announcement.
b Follow screen prompts.
An announcement will end automatically after it has reached its
number of times to play.
Figure 3-3, Announcement Page With Stop Button
To Next Page
Loading...
Need help?
General