109
the closest temporary shelter. An occupant could perform a check-in
to let administrators know that the room is occupied and secure.
Excluded stations should include stations not physically located in a
classroom, such as speakers located in a hallway. Excluded stations
also include stations assigned to appliances, such as power amplifiers
and MMPAs.
You can add or delete a station to the Exclusion or Vacancy Lists by:
•Using Manage Check-In via the dashboard
• Using the Routines feature
For information about using Routines to add or delete a station from
a list, refer to the Nyquist C4000 System Administrator Manual.
To add a station to the Exclusion List via dashboard:
Step 1 If not already on your dashboard, select Dashboard
from the navigation bar.
Step 2 Under Calling/Paging, select Manage Check-In.
Step 3 On the Manage Check-In page, select Configure.
Step 4 Add desired station or stations to the Exclusion List.
Step 5 Select Save.
To remove a station from the Exclusion List via the dashboard:
Step 1 If not already on your dashboard, select Dashboard
from the navigation bar.
Step 2 Under Calling/Paging, select Manage Check-In.
Step 3 On the Manage Check-In page, select Configure.
Step 4 Remove the desired station or stations from the Exclu-
sion List.
Step 5 Select Save.
To add a station to the Vacancy List via the dashboard:
Step 1 If not already on your dashboard, select Dashboard
from the navigation bar.
Step 2 Under Calling/Paging, select Manage Check-In.
Step 3 On the Manage Check-In page, select Configure.
To Next Page
Loading...
Need help?
General