Bosch D9412GV2 - S## Area 1[Through 8]; S## Relay Number

D9412GV2/D7412GV2 | Program Entry Guide | 5.0 RADXSKED EN | 110
Bosch Security Systems | 5/05 | F001U003636B
Default: Blank
Selection: 1 to 11, 13 to 24, 28, 29
S## Area 1[through 8]
Yes
Unbypass all
points in Area #.
5
Unbypass All Points: This function
is not available as a keypad function.
The entry in the
S## Area # prompt
defines the area(s) where the sked
unbypasses all points. The sked
unbypasses all points in the area,
regardless of how they were
bypassed. This sked can unbypass all
points in multiple areas.
Default: No
Selection: Yes or No
Select Yes to unbypass all
points in the areas indicated.
No Do not unbypass
all points in
Area #.
S## Relay Number
Blank
No relay is
activated.
6
Relay On: This function emulates the
Chg Relay keypad function to turn
relays on. The entry in the
S##
Relay Number
prompt defines the
specific relay this sked activates. The
sked can activate one relay.
Default: Blank
Selections: Blank,
1 to 128 for D9412GV2,
1 to 64 for D7412GV2
Enter the number of the relay
the sked activates
1 to 128
Relay to activate.
S## Relay Number
Blank
No relay is
turned off.
7
Relay Off: This function emulates the
Chg Relay? keypad function to turn
relays off. The entry in the
S##
Relay Number
prompt defines the
relay this sked turns off. The sked can
turn off only relays that are set by a
sked. The sked can turn off one relay.
Default: Blank
Selections: Blank,
1 to 128 for D9412GV2,
1 to 64 for D7412GV2
Enter the number of the relay
that turns the sked off.
1 to 128
Relay to turn off.
8 All Relays Off: This function is not available as a keypad function. This sked function turns off all relays
that are turned on by a sked. This is a panel-wide function.
No other parameters require input for this option.