Bosch D9412GV2 - Installation Procedures; Service Walk Test Procedure

D9412GV2/D7412GV2 | Program Entry Guide | 2.0 GV2MAIN EN | 20
Bosch Security Systems | 5/05 | F001U003636B
User Chng Reports
Selecting Yes enables a report to be sent when the
event occurs.
Table 17: User Change Reports
Report Selections Report Description
R# Date
Changed
Yes, No
Date Change Event
R# Time
Changed
Yes, No
Time Change Event
R# Delete
User
∗
Yes, No
Delete User Code
Event
R# User Code
Chg
Yes, No
User Passcode Add
or Change Event
R# Area
Watch
Yes, No
Start and end of area
watch
R# Card
Assigned
Yes, No
Card Assigned to
User Event
R# Change
Level
Yes, No
Access Control Level
Change Event
∗
With R# Delete User Events, the control panel
always uses the account number from Area 1.
Access Reports
Selecting Yes enables a report to be sent when the
event occurs.
Access Granted, No Entry, Request to
Enter (RTE) and Request to Exit (REX)
Events can be enabled or disabled by
each D9210B.
Table 18: Access Reports
Report Selections Report Description
R# Access
Granted
Yes, No
Access Granted Event
R# No Entry
Yes, No
No Entry Event
R# Door Lt
Open
Yes, No
Door Left Open Event
R# Cycle
Door
Yes, No
Open Door Event
R# Door
Unlocked
Yes, No
Unlock Door Event
R# Door
Secure
Yes, No
Secure Door Event
R# Door
Request
Yes, No
RTE or REX Event
R# Door
Locked
Yes, No
Locked Door Event