Brady Wraptor - Electrical Safety Precautions; Warning Labels Identification

2.2 Electrical Safety
CAUTION: Connect the three-conductor plug to an North American
standard 120 VAC outlet. Make sure the outlet is grounded.
WARNING: Turn off power and unplug unit before performing any
service or maintenance on the Wraptor.
2.3 Warning Labels
The following warning label appears on the front of the unit:
Figure 1. Hazardous Moving Parts Label—Front of Unit
The following warning label appears on the inside cover of the unit:
Figure 2. Hazardous Moving Parts Label—Inside Cover
Wraptor™ User’s Guide 5