56 Wraptor™ User’s Guide
6.3.4 Upgrade Printer Files
The Upgrade Printer Files function lets you prepare a new release of the Wraptor’s software for
installation. If your Wraptor is up-to-date, you will see a No updates at this time message. If your Wraptor
software needs to be upgraded:
♦ A prompt appears asking if you want to obtain the updated software from the update web site or from a
Brady-provided upgrade CD-ROM.
♦ The system then transfers the updated software to the CompactFlash Memory Card on the Wraptor unit.
♦ Run the Upgrade System command on the Wraptor Utility menu to install the new software on the
Wraptor (see
Upgrade System Command on page 50).
To Next Page
Loading...
