Wraptor™ User’s Guide 3
The table below shows the specifications for the power cord to be used in various countries:
In this country: Use this power cord:
Sweden, Denmark, Norway, Finland,
Holland, Switzerland, Austria,
Germany, Italy, Belgium, France,
Spain, Portugal, Hungary
Specifications plug: CEE-7
connector: IEC 320
conductor size: 3 x 1.00 mm
2
description: H05VVF3G1.0
typ. stranding: 32/0.2 mm
current rating: 10A
voltage rating: 250 VAC
maximum length: less than 3 meters
United Kingdom, Ireland, South
Africa
Specifications plug: BS 1363A
connector: IEC 320
conductor size: 3 x 1.00 mm
2
description: H05VVF3G1.0
typ. stranding: 32/0.2 mm
current rating: 10A
voltage rating: 250 VAC
maximum length: less than 3 meters
Australia, New Zealand Specifications plug: AS 3112-1981
connector: IEC 320
conductor size: 3 x 1.00 mm
2
description: AS 3191
typ. stranding: 32/0.2 mm
current rating: 10A
voltage rating: 250 VAC
maximum length: less than 3 meters
1.4.6 System Requirements
Following are the recommended requirements for the computer on which you will install and run
LabelMark, the File Management Utility and the Wraptor Printer Driver:
Intel® Pentium® processor (minimum 66 MHz 486DX2)
Operating system:
Microsoft® Windows® 2000 with Service Pack 1
Microsoft® Windows® NT with Service Pack 6a
Microsoft® Windows® XP
Microsoft® Internet Explorer 5.01
64MB of RAM (minimum 16 MB of RAM)
100 MB of available hard-disk space
16-bit or greater video display card
800x600 or greater monitor resolution
CD-ROM Drive
To Next Page
Loading...
Need help?
General
