Figure 24. Touch Screen Keyboard Dialog
Description of Settings
Name: The computer will use this name to locate the printer on the network. The name must be unique if
multiple Wraptor printers are in use on the network. Change the name by pressing the Enter… button to the
right of the Name field.
Desc: The description setting provides a field to enter in extra information about the device like the location
or the type of label material typically loaded in the printer. Change the description by pressing the Enter…
button to the right of the Desc field.
Port: The port number is required for the TCP connection and you should always use the default value of
9100. Change the port number by pressing the Enter button to the right of the Port field.
Obtain DHCP Address: If you select this option (by pressing it with your finger), the network
automatically configures the rest of the settings.
Specify IP Address: If you select this option (by pressing it with your finger), you must manually enter the
IP address information in the DNS Number and IP Number dialogs.
Figure 25. DNS/WINS Server Address Entry Figure 26. Fixed IP Address Entry
To enter an IP Address:
♦ Press Enter DNS Number… on the IP tab.
Wraptor™ User’s Guide 47
To Next Page
Loading...
Need help?
General
