7.1.4 Cleaning the Rollers
Follow these steps to clean the rollers:
1. Follow the steps in
Before You Begin on page 57 of this guide.
2. Open the side door on the Wraptor.
3. Dip a cotton swab in the isopropyl alcohol.
4. Using the moistened swab, clean the rollers (drive rollers, nip rollers, and guide rollers). Make sure each
roller is free of dust, debris and label adhesive.
NOTE: Drive rollers can be advanced manually for
cleaning by turning the large pulley behind the label
rewind hub.
NOTE: Use as many swabs as necessary so that you are
always using a fairly clean swab.
5. Close the side door.
Figure 37. Clean Rollers
1. Drive Rollers
2. Nip Rollers
3. Guide Rollers
4. Pulley
60 Wraptor™ User’s Guide
To Next Page
Loading...
