♦ The DNS Number dialog (Figure 25) appears.
♦ To enter an IP address:
Touch the field you want to enter the IP address for.
Press the Enter button to display the keypad (Figure 26).
Use the < and > keys to move from field to field with the IP address.
Use the numbers to change the address.
Press OK to save the address.
Press Cancel to exit without saving.
♦ Repeat this process for the other IP addresses in the DNS Number dialog.
♦ When you are finished with the DNS Number dialog, press OK.
♦ Press the Enter IP Number… button to display the IP Number dialog (Figure 27) appears. Repeat the
process to enter the IP addresses in this dialog.
Figure 27. IP Number Keypad.
Figure 28. Default Gateway Entry
48 Wraptor™ User’s Guide
To Next Page
Loading...
Need help?
General
