2-30
Confidential
Received Fax XX Set the appropriate
paper in except Tray 2.
Only T2 tray is set for A4 / Letter /
Legal / Folio but T2 is set as "Skip
Tray".
9B03 2-72
Set the appropriate
paper in except Tray 3.
Only T3 tray is set for A4 / Letter /
Legal / Folio but T3 is set as "Skip
Tray".
9B04 2-72
Set the appropriate
paper in except Tray 4.
Only T4 tray is set for A4 / Letter /
Legal / Folio but T4 is set as "Skip
Tray".
9B05 2-72
Set the appropriate
paper in except Tray 5.
Only T5 tray is set for A4 / Letter /
Legal / Folio but T5 is set as "Skip
Tray".
9B06 2-72
Replace Toner Open the Front Cover,
replace Toner
Cartridge.
Dot counter or develop roller
counter of the toner has reached
the upper limit.
4C01 2-45
Scan Unable Document is too long
for 2-sided scanning.
Press Stop[x].
The first side document scanning
position sensor detected that the
document length was 400 mm or
longer and could not be fed to
ADF (double-side restoration).
BF00 2-78
Remove the original
document.
Turn the power off,
then on again.
Image processing was not
completed correctly because the
number of pixels required for
image processing is insufficient in
the scanned second side data.
A000 2-73
Image processing cannot be
completed correctly because the
number of pixels required for
image processing is insufficient in
the scanned first side data.
AD00 2-75
Scan Unable ** Turn the power off and
then back on again.
A machine error occurred.
Refer to the error code “**”.
--- ---
Scanner Error **
-
A white level not within the
standard was scanned when
function code 55 was executed.
BB00 2-77
A black level not within the
standard was scanned when
function code 55 was executed.
BD00 2-77
Error message
Description
Error
codes
Refer
to:
First line Second line
To Next Page
Loading...
Need help?
General
