How to fix Memory Full error on Brother HL-5350DN?
If your Brother printer displays 'Memory Full', you can press the Go button to print the remaining data in the printer memory or cancel the print job to delete the remaining data. You can also reduce the complexity of your document or cut the print resolution. Another option is to add more memory.
What to do if my Brother HL-5350DN shows a Print Overrun error?
If your Brother printer shows a 'Print Overrun' error, you can press the Go button to print the remaining data in the printer memory, or cancel the print job to delete the remaining data. Alternatively, reduce the complexity of your document or lower the print resolution. Adding more memory may also resolve this issue.
Why my Brother HL-5350DN cannot print full pages and shows MEMORY FULL error?
If your Brother printer cannot print full pages and shows a 'MEMORY FULL' error, try the following: Press 'Go' to print the remaining data, or cancel the job to clear the memory. Alternatively, reduce the complexity of your document or lower the print resolution. Adding more memory to the printer may also solve the issue.
What to do when Brother HL-5350DN cannot print full pages and shows PRINT OVERRUN error?
If your Brother printer cannot print full pages and displays a 'PRINT OVERRUN' error, you can try the following: Press the 'Go' button to print the remaining data in the printer memory, or cancel the print job to delete the remaining data. Reducing the complexity of your document or cutting the print resolution may also help. You might also consider adding more memory to the printer.
How to fix No Paper error on Brother Printer?
If your Brother printer displays 'No Paper', 'No Paper for Manual Feed', 'No Paper MP or Size Mismatch', 'No Paper in Tray 1 or Size Mismatch', 'No Paper in Tray 2 or Size Mismatch', or 'No Paper in Tray 3 or Size Mismatch', it might be out of paper or the tray isn't properly installed. Add a new stack of paper and press Go. If the problem persists, the paper pick-up roller might be stained and require cleaning. Also, ensure the paper is straight and not curled. Try reducing the amount of paper in the tray or using paper that meets Brother’s specifications. Finally, ensure you've loaded the correct paper size selected in the driver settings.
Why is my Brother Printer printing garbage data?
If your Brother printer is printing unexpectedly or printing garbage data, ensure the printer cable is not too long (ideally under 2 meters), and that it is not damaged. If you're using an interface-switching device, remove it and connect the computer directly to the printer. Check that you have selected the correct printer driver and set it as the default. Also, ensure the printer isn't connected to a port shared with a storage device or scanner. Try turning off the Status Monitor.
What does Toner Low mean on my Brother Printer?
If your Brother printer displays 'Toner Low', you should buy a new toner cartridge, so you have it ready for when the 'Replace Toner' status appears.
How to clear paper jam on Brother HL-5350DN Printer?
If your Brother printer displays 'Jam MP Tray Jam Tray 1 Jam Tray 2 Jam Tray 3 Jam Inside Jam Rear Jam Duplex', clear the jammed paper from the indicated area.
What to do if Brother Printer shows Incorrect paper size for auto DX?
If your Brother printer indicates 'Incorrect paper size for auto DX', press Go or Job Cancel. Then, set the correct paper size you want to use, or load the same size paper that you selected in the current driver setting. Note that automatic duplex printing supports A4, Letter, Legal, or Folio paper sizes.
How to fix Front Cover is Open error on Brother HL-5350DN?
If your Brother printer displays 'Front Cover is Open', close the front cover of the printer.
General| Color | No |
|---|---|
| N-up printing | 4, 9, 16, 25 |
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Economical printing | Yes |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 30 ppm |
| Internal memory | 32 MB |
| Processor model | NEC VR5500 |
| Maximum internal memory | 544 MB |
| Sound power level (standby) | 35 dB |
| Sound pressure level (printing) | 54 dB |
| Total input capacity | 250 sheets |
| Total output capacity | 150 sheets |
| Multi-Purpose tray input capacity | 50 sheets |
| Maximum print size | 216 x 356 mm |
| Media weight (tray 1) | 60 - 105 g/m² |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Supported network protocols (IPv4) | IPv4: ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Server, TELNET Server, HTTP/HTTPS server, SSL/TLS, TFTP client and server, SMTP Client, APOP, POP before SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMP, LLTD responder, WebServicesPrint, IPv6: NDP, RA, DNS resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Server, TELNET Server, HTTP/HTTPS server, SSL/TLS, TFTP client and server, SMTP Client, APOP, POP before SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMPv6, LLTD responder, WebServicesPrint |
| Networking features | 10/100 Base-TX |
| Power consumption (active) | 675 W |
| Compatible operating systems | Windows: Vista, 2000 Prof., XP Home Edition, XP Prof. Edition (32 & 62 bits), Server 2003 (32 & 64 bits), Server 2008. MacIntosh: Mac OS X 10.3.9 + Linux |
| Power consumption (standby) | 75 W |
| Power consumption (PowerSave) | 6 W |
| Package weight | 11500 g |
Weight and Dimensions| Dimensions (WxDxH) | 371 x 384 x 246 mm |
|---|
To Next Page
