Brother HL-5350DN

3-33
Confidential
3.7 Curl in the paper
Slide the lever 2 to the right while pushing up the lever 1 to the direction of the arrow.
Fig. 3-4
3.8 Prints only single side of the paper when duplex-printing
The curl in the left figure.
<User Check>
- Change the paper.
Step Cause Check
Result Remedy
1
Mismatch the
setting the paper
and the eject roller
1
Is the problem solved by
changing the position of
the anti-curl lever ?
Yes
Change the position of the
anti-curl lever.
Step Cause Check
Result Remedy
1
Used small paper Is the A4/LETTER used?
No
Use the paper of the A4/
LETTER.
2
1