Brother HL-5350DN

7-18
Confidential
<Function Table>
Title & Subtitle Item to be Set Description
TRAY SETTING
MANUAL FEED PAPER IN=CONT* Feeds paper automatically when
printing using the manual feed
function.
PAPER IN=STOP Feeds paper by pressing the [Go]
button when printing using the
manual feed function.
RESET SETTINGS RESET SETTING1 Selects the "User setting 1" as the
current printer setting.
SAVE SETTINGS SAVE SETTING1 Saves the current printer setting as
the "User setting 1".
SAVE FONT
PRIMARY FONT SET ID=#### Saves the current primary fonts in
LaserJet Emulation into the storage
devices (ROM Disk).
After fixing the first three digits with
the Set button, set the last two digits.
SECONDARY FONT SET ID=#### Saves the current secondary fonts in
LaserJet emulation into the storage
devices (ROM Disk).
After fixing the first three digits with
the Set button, set the last two digits.
DOWNLOAD FONT DOWNLOAD=#### Saves the downloaded fonts in
LaserJet emulation into the storage
devices (ROM Disk).
After fixing the first three digits with
the Set button, set the last two digits.
SAVE MACRO
(When a macro is
registered if the
LaserJet emulation is
selected.)
SET ID=#### Saves the macro in LaserJet
emulation into the storage devices
(ROM Disk).
After fixing the first three digits with
the Set button, set the last two digits.
TRAYCOMMAND
MODE
TRAY COM.=NORM.* HP LaserJet 4 compatible.
TRAY COM.=SPEC. HP LaserJet 3 compatible.
READOUT SELECT READOUT=ON When receiving DC3 in FX
emulation, ignores the data received
before DC1.
READOUT=OFF* Not ignore the data even DC3 is
received.