iii
Confidential
DO NOT take apart or attempt to convert the machine. This may create a risk of fire or
electrical shock. Such conduct may also be punished by the law.
If the machine has been dropped or the casing has been damaged, there may be the
possibility of an electrical shock. Unplug the machine from the AC power outlet.
DO NOT drop any metallic hardware or any type of liquid on the power plug of the machine.
It may cause an electrical shock or a fire.
If water, other liquids, or metal objects get inside the machine, immediately unplug the
machine from the AC power outlet.
This machine should be connected to an AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter. If you are not sure what
kind of power source you have, contact a qualified electrician.
Power Cord Safety:
- DO NOT pull on the middle of the AC power cord; pulling on the middle may cause the
cord to separate from the plug. Doing this might cause an electrical shock.
- DO NOT allow anything to rest on the power cord.
- DO NOT place this machine where people can walk on the cord.
- DO NOT place this machine in a position where the cord is stretched or strained, as it may
become worn or frayed.
- DO NOT use the machine or handle the cord if the cord has become worn or frayed. If
unplugging your machine, DO NOT touch the damaged/frayed part.
DO NOT use this machine during an thunderstorm.
Use caution when installing or modifying telephone lines. Never touch telephone wires or
terminals that are not insulated unless the telephone line has been unplugged at the wall
jack. Never install telephone wiring during a lightning storm. Never install a telephone wall
jack in a wet location.
To Next Page
Loading...
Need help?
General
