5-36
Confidential
1.3.19 Printout of PRN/JPEG Files in USB Flash Memory (Maintenance mode 61)
< Function >
This procedure prints PRN files and JPEG files stored in a USB flash memory.
The following four print modes are available.
- Printing the specified file once
- Printing the specified file repeatedly
- Printing all PRN/JPEG files once
- Printing all PRN/JPEG files repeatedly
File name requirements
The target files are located in the root directory. JPEG files may be located in the
“BROTHER” folder.
PRN file: Maximum of 16 characters consisting of alphanumerics, underline "_" and
parentheses "()", including the extension .prn
JPEG file: Maximum of 16 characters consisting of alphanumerics, underline "_" and
parentheses "()", including the extension .jpg
The maximum number of files is 999.
< Operating Procedure >
Note: Before carrying out maintenance mode 61, update the firmware to the latest
version.
(1) Insert a USB flash memory.
(2) Press the 6 and 1 keys in this order in the initial stage of the maintenance mode.
The "MAINTENANCE 61" appears on the LCD.
(3) To print a PRN file(s), press the # key; to print a JPEG file(s), press the * key.
Files of the selected type appear on the LCD.
(4) To print the specified file once, select the target file with the
▲ / ▼ keys and press
the 4 key.
To print the specified file repeatedly, select the target file with the
▲ / ▼ keys and
press the 6 key.
To print all files of the selected type once, press the 7 key.
To print all files of the selected type repeatedly, press the 9 key.
(5) The "1.A4 2.LETTER" appears on the LCD.
(6) Pressing the 1 key or the 2 key, in accordance with the size of the recording paper,
starts printing. Upon completion of printing, the machine returns to the initial stage
of the maintenance mode. Pressing the X key during repeated printing returns the
machine to the state showing the "MAINTENANCE 61" on the LCD.
Notes: - This function is not available when Error Code A*** or B*** occurs.
- When recording paper runs out during printing, the maintenance mode
goes back to the initial state, therefore, be sure to load recording paper in
the paper tray before executing printing.
To Next Page
Loading...
Need help?
General
