5-63
Confidential
1.3.31 Equipment Error Code Indication (Maintenance mode 82)
< Function >
This function displays all the error codes of the machine errors that are currently
occurring on the LCD.
< Operating Procedure >
(1) Press the 8 and 2 keys in this order in the initial stage of the maintenance mode.
The LCD shows the "MACHINE ERR XXXX."
If no error has occurred, “MACHINE ERR 0000” is displayed on the LCD.
Tip: If two or more errors have occurred, press the Mono Start key to cycle
through the error codes.
(2) Press the X key to stop this operation and return the machine to the initial stage of
the maintenance mode.
1.3.32 Output of Transmission Log to the Telephone Line (Maintenance mode 87)
< Function >
This function outputs the transmission log to the telephone line. It allows the service
personnel to receive the transmission log of the user’s machine at a remote location
and use it for analyzing FAX transmission problems arising in the user’s machine.
< Operating Procedure >
- At the service site
(1) Call the user’s machine at a remote location from your machine.
- At the user site, have the user perform the following.
(2) With the machine on standby, hold down the Home key to switch the LCD screen.
(3) Press the blank frame at the bottom of the LCD.
(4) Press the *, 0, #, 8, and 7 keys in this order.
The user’s machine displays the "SENDING P.01" on the LCD and outputs the
transmission log (error list).
(5) Upon completion of error list transmission, the machine returns to the standby
state.
- At the service site
(6) Upon start of error list transmission, press the Start key. "Send or Receive?/1.Send
2.Receive" is displayed on the LCD screen.
(7) Press the 2 key to start the receipt of the error list.
To Next Page
Loading...
Need help?
General
