5-14
Confidential
[ 2 ] Printout of worker switch data (Maintenance mode 11)
< Function >
This function prints out the setting items of the worker switches and their contents
specified.
< Operating Procedure >
(1) Press the 1 key twice in the initial stage of the maintenance mode.
The machine shows "PRINTING" on the LCD and prints out the configuration list
as shown below.
If no recording paper is loaded in the paper tray, printing will be canceled.
(2) Upon completion of printing, the machine returns to the initial stage of the
maintenance mode.
Note: When recording paper runs out during printing, load recording paper in the paper
tray and open/close the document scanner, and printing resumes.
To Next Page
Loading...
