Brother P-touch QL-710W User Manual

1 - 7
(3) “Setting” screen appears. Change the port by selecting desirable port number
from the “Port No” drop list, and click the [OK] button. A screen with “Do you save
"Port No"?” message appears, then click the [OK] button again.
NOTE: The changed setting is saved even after closing the tool.
Fig. 11 COM setting
(4) Return to the “Config” screen, and click the [OK] button to return to the main
screen.
Change the port by selecting
desirable COM port number.

Brother P-touch QL-710W Specifications

General

Maximum Label Width	62 mm
Resolution	300 dpi
Cutter	Automatic
Device Category	Label Maker
Power Source	AC adapter
Printing Technology	Thermal
Connectivity	USB, Wi-Fi
Media Type	Die-cut labels, Continuous labels
Supported OS	Windows, Mac