Brother S-7300A - Page 18

S-7300A
3. FUNCTION SETTINGS
7
No. Setting range
Initial
value
Setting
units
Setting details
050
ON/OFF
ON
－
Treadle Forward interlock during thread trimming
ON: Depressing treadle forward during thread trimming is disabled
After the treadle is returned to the neutral position, depressing it
forward is enabled.
OFF: Depressing treadle forward during thread trimming is enabled
051
ON/OFF
(*2)
－
Operation after knee switch is used to raise and lower presser foot
ON: Presser foot can be raised and lowered by depressing the treadle
backward
OFF: Above operation is not possible
055
ON/OFF
(*2)
－
Presser foot operation when machine motor stops with the presser foot in
the raised position, and then the presser foot is lowered and the treadle is
then moved to the neutral position
(*) Displayed when MSW-851 is set to "ON"
ON: Presser foot is raised
(*) The presser foot does not lift when MSW-851 is set to "OFF".
OFF: Presser foot is not raised
057
ON/OFF
(*2)
－
Presser foot operation when treadle is depressed forward to 1st step
(*) Displayed when MSW-852 is set to "ON"
ON: Presser foot is lowered
OFF: Presser foot is not lowered
(*2) For other than Europe and America: ON
For Europe and America: OFF