BST ekr CON 600 net Translation Of The Original Manual

4
Communication Objects
54/79 ekr CON 600 net – Process Data Exchange via Profibus
4.2.2.9 Reference Offsets
Slot 2
Index 37
Name Reference Offsets
Function Specifying offset values (position offsets) for the position indicators in the controller
operating display
With the position offsets, you can create a reference system with an absolute reference
point for the position of the scanned web edges, the actuator or the sensor slides of a
sensor positioner or a positioning unit. This reference point can be a distinctive point
on the machine (e.g. machine wall or center of the machine). The set offset value
(position offset) is added to the detected position of the web edge, the actuator or the
sensor slide and then results in the absolute distance to the reference point selected.
This distance is displayed in the controller operating display under the symbol for the
corresponding web guiding component.
Data types SInteger32
Access Read & Write
Object length 40 Byte
Name Data Type Meaning Data Description
SEN1 SInteger32 Position offset sensor positioner sensor slide1 Unit: µm
SEN2 SInteger32 Position offset sensor positioner sensor slide2 Unit: µm
SEN3 SInteger32 —
SEN4 SInteger32 —
CAM1 SInteger32 Position offset CCD camera1 Unit: µm
CAM2 SInteger32 Position offset CCD camera2 Unit: µm
CAM3 SInteger32 Position offset CCD camera3 Unit: µm
DRV1 SInteger32 Position offset actuator Unit: µm
POS UNIT1 SInteger32 Position offset sensor slide positioning unit1 Unit: µm
POS UNIT2 SInteger32 Position offset sensor slide positioning unit2 Unit: µm

BST ekr CON 600 net Specifications

General

Brand	BST
Model	ekr CON 600 net
Category	Controller
Language	English