10
Type 8692, 8693
english
General Information
Safety Instructions
3 GENERAL SAFETY INSTRUCTIONS
These safety instructions do not make allowance for any
contingencies and events which may arise during the installation, operation and maintenance of the devices.•
local safety regulations; the operator is responsible for observing these regulations, also with reference to the installation •
personnel.
DANGER!
Danger – high pressure!
There is a serious risk of injury when reaching into the equipment. •
Before loosening the lines and valves, turn off the pressure and vent the lines.•
Risk of electric shock!
There is a serious risk of injury when reaching into the equipment.
Before starting work, always switch off the power supply and safeguard to prevent re-activation!•
Observe applicable accident prevention and safety regulations for electrical equipment!•
WARNING!
Unintentional activation or non-permitted impairment may cause general hazardous situations through to physical
injury.
Take appropriate measures to prevent the equipment from being accidentally actuated!•
Hazardous situations can arise during installation and maintenance work.
This work may be carried out by authorized technicians only and with the appropriate tools!•
After an interruption in the power supply or pneumatic supply, ensure that the process is restarted in a defined or controlled •
manner!
CAUTION!
The general rules of technology apply to applications planning and operation of the device!
Failure to observe these rules may result in injuries and/or damage to the device, and possibly its environment as well.
Observe the general rules of technology!•
CAUTION!
Electrostatic sensitive components / modules!
The device contains electronic components which react sensitively to electrostatic discharge (ESD). Contact with electro-•
statically charged persons or objects is hazardous to these components. In the worst case scenario, they will be destroyed
immediately or will fail after start-up.
Observe the requirements in accordance with EN 100 015 – 1 to minimize or avoid the possibility of damage caused by •
sudden electrostatic discharge!
Also ensure that you do not touch electronic components when the power supply voltage is present! •
The positioners Type 8692 and Type 8693 were developed with due consideration given to the accepted safety rules
and are state-of-the-art. However, dangers can still arise.
Operate the device only when it is in perfect condition and in accordance with the operating instructions.
Failure to observe these instructions and unauthorized tampering with the device release us from any liability and also
invalidate the warranty covering the devices and accessories!
To Next Page
Loading...
