145Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Sanitary fittings
10
Emptying: Use the cap (Fig. 184,3) to close the opening of the waste water tank
(Fig. 184,1).
Use the handle (Fig. 184,2) to pull out the waste water tank.
Fold the carrying handle (Fig. 184,4) up and upright the waste water tank.
Completely empty the waste water tank at disposal stations that are espe-
cially provided for this purpose.
10.4 Warming unit of waste water pipes (special equipment)
In order to prevent waste water pipes from freezing, the waste water pipes can
be electrically warmed. The section 9.2.6 describes how to operate this
warming unit.
10.5 Filling the water system
Position the vehicle horizontally.
Connect the 230 V power supply and switch on the 230 V automatic circuit
breaker. If the vehicle is equipped with a self-sufficiency package with bat-
tery, it is not necessary to connect it to a 230 V power supply.
Clean or disinfect water system.
Fig. 184 Waste water tank, mobile
X When filling the water tank, observe the maximum permissible gross
weight of the vehicle. Luggage must be reduced accordingly when the
water tank is full.
Z The water pump will overheat without water and can get damaged. Never
operate water pump when the water tank is empty.
Fig. 185 Drain cock (with rocking lever) Fig. 186 Drain cock (with twist cap)
To Next Page
Loading...