EasyManua.ls Logo

Burstner Premio - Maintenance; Inspection Work and Intervals

Burstner Premio
224 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
165Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Maintenance
12
12Maintenance
Chapter overview
This chapter contains instructions about inspection and maintenance work
concerning the vehicle.
The maintenance instructions address the following topics:
z caravan couplings
z manoeuvring system
z braking system
z doors
z replacing light bulbs
z spare parts
At the end of the chapter you will find important instructions on how to obtain
spare parts.
12.1 Inspection work
Like any technical appliance, the vehicle must be inspected at regular inter-
vals.
This inspection work must be carried out by qualified personnel.
Special technical knowledge, which cannot be taught within the framework of
this instruction manual, is required for these tasks. Personnel possessing this
technical knowledge are available for assistance at all service centres. Their
experience and regular technical instruction by the factory as well as equip-
ment and tools guarantee expert and up-to-date inspection of the vehicle.
Have the "First Programmed Inspection" carried out at a service centre
12 months after initial registration.
Further inspections should be carried out once a year.
The service centre in charge will confirm the work performed.
12.2 Maintenance work
As with every machine, this vehicle requires maintenance. The extent and fre-
quency of the maintenance work required depend on conditions of operation
and use. More difficult operating conditions make it necessary to service the
vehicle more often.
Have the appliances serviced at the intervals specified in the corresponding
instruction manuals.
12.3 Stabilisers
12.3.1 General
Clean the stabiliser and the coupling head regularly. Use either thinners or
white spirit. When lubricating the stabiliser ensure that no lubricant is on the
friction pads.
Z Observe the inspections indicated by the manufacturer and have them car-
ried out at the specified intervals. The value of the vehicle is thus pre-
served.
Z The confirmation of the inspection work carried out serves as valid proof in
the event of damage and guarantee claims.

Table of Contents

Related product manuals