Burstner Premio - Operation (Thetford N3000)

136 Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Appliances
9
Switching the 230 V
operation off:
 Press and hold the On/Off button for about 2 seconds. Refrigerator is
switched off.
Switching the 12 V
operation on:
 Press and hold the On/Off button (Fig. 171,1) for about 2 seconds. The
refrigerator switches itself on. The button of the operating mode chosen
most recently lights up.
 If necessary, press the button for the operating mode "12 V" (Fig. 171,4).
The button lights up.
 Use the temperature range selection button (Fig. 171,5) to set the refriger-
ating temperature.
Switching the 12 V
operation off:
 Press and hold the On/Off button for about 2 seconds. Refrigerator is
switched off.
When operated with 12 V, the refrigerator draws power only from the starter
battery of the vehicle. The starter battery only supplies the refrigerator with
12 V when the vehicle engine is running. When the vehicle engine is not run-
ning, the refrigerator is cut off from the power supply in the living area. For this
reason, change over to gas operation during prolonged driving breaks.
9.6.4 Operation (Thetford N3000)
Operating modes The refrigerator has 3 operating modes:
z Gas operation
z 230 V operation
z 12 V operation
The current operating mode is indicated by an illuminated symbol (Fig. 172,4)
on the operating unit.
Z Further information can be obtained from the separate instruction manual
"Refrigerator".
Z The refrigerator starts when it is switched on with the setting selected last.
Z Flashing lamps on the operating unit indicate a fault (see section 14.9).
Fig. 172 Operating controls for the refrigerator
1 On/Off button
2 Arrow keys
3 Confirmation button
4 Indicator for operating mode (230 V operation/12 V operation/gas operation)
5 Indicator for cooling level (lowest - highest cooling level)