Burstner Premio - Inspection Plan

213Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Inspection plan
18
18Inspec tion plan
Pos. Component Activity Interval
1 Jockey wheel Lubricate, check wheel
rims for damage, visu-
al check of the tyres,
check threaded spin-
dle and crank
Annually
2 Corner steadies Lubrication Annually
3 Joints, hinges and levers on the
chassis
Lubrication Annually
4 Underbody Visual check, repair
underbody protection
as necessary
Annually
5 Chassis Lubrication Annually
6 Wheel attachment Tighten the wheel
nuts, check tyre bear-
ings
Annually
7 Tyres and wheel rims Air pressure check
(see section 13.7).
Visual check for dam-
age, tread depth at
least 2 mm
Annually
8 Brakes Check and adjust if
necessary
Annually
9 Outside lighting Function check Annually
10 Refrigerator, heater, kitchenette,
storage flap locks, water system,
interior electrics
Function check Annually
11 Upholstery, curtains, blinds Visual check Annually
12 Windows, skylights Function check, water
ingress test
Annually
13 Sealing strips, edges, rubber Check for damage Annually
14 Brake lining Lining thickness min.
4mm
Every
two years
15 Brake drums Visual check for wear
and rust, check spring
tension
Every
two years
16 Axle bearing Check the slack Every
two years
17 Slotted nut on the wheel Check position and
dummy fuse
Every
two years
18 Overrun brake Function check Every
two years
19 Brake cable assembly Visual check Every
two years
20 Chassis underbody Check bolts are firmly
secured
Every
two years
21 Gas fittings Official gas inspection Every
two years