Burstner Premio - Bench and Central Seating Group with Additional Cushion

76 Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Living
6
6.14.2 Bench and central seating group with additional cushion
 Convert the table (Fig. 95,3) to a bed foundation (see section 6.12).
 Remove the back cushion (Fig. 96,5) and lay it aside.
 Pull the seat cushion (Fig. 96,2) into the middle.
 Place the back cushion (Fig. 97,1) between the seat cushion and the wall.
 Place the additional cushion (Fig. 97,6) between the seat cushions
(Fig. 97,2 and 4).
Z Depending on the model, the seating group can be different in shape and
position to the one shown here.
Fig. 95 Prior to conversion
Fig. 96 During conversion
Fig. 97 After conversion
1 Back cushion
2 Seat cushion
3Table
4 Seat cushion
5 Back cushion
6 Additional cushion (basic)