Burstner Premio - Ceiling Lamp; Ceiling Lamp (Cover with Clips)

171Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Maintenance
12
12.8.1 Ceiling lamp (cover with clips)
Bulb 220 V/100 W/E 27
Changing bulbs:
 Carefully release the retaining clips (Fig. 209,1) on the ceiling lamp and
take off the glass cover (Fig. 209,2).
 Remove the bulb from the holder.
 Insert the new bulb and turn it in a clockwise direction until you feel a slight
resistance.
 Re-fasten the glass cover with the retaining clips.
12.8.2 Ceiling lamp
The ceiling lamp has LEDs.
X Lights can get very hot. When the light is switched on, there must always
be a safety distance of 30 cm between light and flammable objects. Fire
hazard!
X Do not replace the LEDs in lamps with standard light bulbs. Risk of fire
due to intense heat build up.
Z A new bulb should not be touched with the fingers. Use a cloth when
installing the new bulb.
Z Only use bulbs of the same type and with the correct wattage.
Z If LEDs in lights are defect, contact an authorised dealer or service centre.
Fig. 209 Ceiling lamp
Fig. 210 Ceiling lamp