Burstner Premio - Widening Single Beds (Special Equipment)

73Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Living
6
Safety net The safety net (Fig. 89,2) and the retaining belts are located underneath the
mattress in the pull-down bed. Only use the safety net if persons are already
in the pull-down bed.
Setting up:
 Attach the retaining belts (Fig. 89,1) to the hooks on the ceiling.
Access ladder Always use the provided access ladder (Fig. 89,5) to climb up to the pull-down
bed.
Attaching:
 Hook access ladder (Fig. 89,5) to the pull-down bed by attaching the two
hooks (Fig. 89,4) in the holding bar (Fig. 89,3).
Storing away:
 Hang the access ladder (Fig. 89,5) from the holding bar (Fig. 89,3) on the
pull-down bed.
 Store the access ladder securely.
6.13.5 Widening single beds (special equipment)
 Remove the bedside locker cover (Fig. 90,2) and put it to one side.
 Pull out slatted frame (Fig. 91,4) completely. To do this, pull on the exten-
sion (Fig. 91,3).
 Place the additional cushion (Fig. 92,5) on the bedside locker.
 Place the additional cushion (Fig. 92,6) between the mattresses
(Fig. 92,1).
Fig. 90 Prior to conversion
Fig. 91 During conversion
Fig. 92 After conversion
1 Mattress
2 Bedside locker cover
3 Bedside locker extension
4 Slatted frame
5 Additional cushion
6 Additional cushion