Burstner Premio - Page 72

72 Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Living
6
The pull-down bed is located above the rear seating group.
The pull-down bed has two locking positions in the uppermost position. The
pull-down bed is securely locked in both locking positions.
Lowering the pull-down bed:
 Switch off the lamps underneath the pull-down bed.
 Remove any obstacles in the area into which the pull-down bed extends
(e.g. headrests).
 Fold over the back cushions.
 Pull out the release area (Fig. 88,1) at the bottom. The lock is released.
 With both hands, pull the pull-down bed down as far as it will go.
 If the pull-down bed was in the uppermost locking position: Pull the release
area out again to override the second locking position. With both hands,
pull the pull-down bed down as far as it will go.
 Make sure that the pull-down bed is in the lower end position and is not
resting on obstacles such as headrests or cushions.
Lifting the pull-down bed:
 Switch off the reading lamps on the ceiling.
 Using both hands, push the pull-down bed upwards as far as the first
locking position. If necessary, push the pull-down bed further upwards as
far as the uppermost locking position. When doing this, ensure that the
snap latch engages audibly in the locking bracket.
 Check that the pull-down bed is locked correctly. To do this, pull down the
pull-down bed firmly.
Z You must be able to close the pull-down bed without any great effort, so
that there is no tension in the locking position. Objects on the pull-down bed
can distort the lifting mechanism on one side, resulting in damage.
Fig. 88 Release Fig. 89 Pull-down bed complete with
applied safety net
Z When closing the pull-down bed, pull the side fabric panels inwards. This
prevents the fabric from getting trapped in the lock of the pull-down bed.
Z Depending on the model, the pull-down bed is equipped with a one-piece
or two-piece safety net.