82 Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Living
6
6.15 Shower connection point for external shower (special
equipment)
Connecting an external
shower:
Unlock and open the cover (Fig. 113,4).
Attach hose of the external shower to the quick closure (Fig. 113,3).
Using the shower:
Switch on the water pump using the switch (Fig. 113,2).
Adjust the water temperature with the rotary knob (Fig. 113,1) as desired.
Switch off the water pump using the switch (Fig. 113,2).
Shutting off the shower
connection point:
Switch off the water pump using the switch (Fig. 113,2).
Disconnect the hose from the quick closure. The quick closure is equipped
with a check value to prevent any further water from escaping.
Close the cover (Fig. 113,4) and lock with key.
Emptying:
Attach hose of external shower to quick closure. The check valve is opened
and the connections can run dry.
Turn knob (Fig. 113,1) to the centre position.
Empty the water system (see section 10.6).
X Only use the external shower if there is a gap of at least 1.20 m between
the shower and the nearest electrical device or connection. Risk of elec-
tric shock!
Z If decommissioned for a longer time or if there is a risk of frost, drain the
water system.
Fig. 113 External shower connection
point
To Next Page
Loading...