176 Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Maintenance
12
The vehicle described in this instruction manual is built and equipped to factory
standards. Special equipment is offered depending on its purpose or use.
When fitting special equipment check if such equipment has to be entered in
the vehicle documents. Observe the max. permissible gross weight. The
authorised dealer or service centre will be happy to advise you.
12.10 Vehicle identification plate
The vehicle identification plate (Fig. 220) with the chassis number is mounted
on the front right side, in the gas bottle compartment.
Do not remove the vehicle identification plate. The vehicle identification plate:
z Identifies the vehicle
z Helps with the procurement of spare parts
z Together with the vehicle documents identifies the vehicle owner
12.11 Warning and information stickers
There are warning and information stickers on and inside the vehicle. Warning
and information stickers are for the sake of safety and must not be removed.
Fig. 220 Vehicle identification plate
1 Chassis number
2 Maximum permissible gross weight
3 Permissible drawbar nose weight
4 Permissible axle load
Z Always include the chassis number with all inquiries for the customer
service office.
Z Replacement stickers can be obtained from an authorised dealer or a
service centre.
To Next Page
Loading...