Burstner Premio - Round Seating Group Without Additional Cushion

78 Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Living
6
6.14.4 Round seating group without additional cushion
 Remove the back corner cushions (Fig. 101,1) and the back cushion
(Fig. 101,2) and store them under the table.
 Place the seat cushions (Fig. 102,5) in an upright position.
 Convert the table (Fig. 102,6) to a bed foundation (see section 6.12).
 Place the back cushions (Fig. 103,4) against the exterior wall. Observe the
wedged form.
 Push the two seat cushions (Fig. 103,5) between the back cushions.
Observe the wedged form.
Z Depending on the model, the seating group can be different in shape and
position to the one shown here.
Fig. 101 Prior to conversion
Fig. 102 During conversion
Fig. 103 After conversion
1 Back corner cushion
2 Back cushion
3 Seat cushion
4 Back cushion
5 Seat cushion
6Table
7 Bedding box