EasyManua.ls Logo

Burstner Premio - Caravan Control System (ATC)

Burstner Premio
224 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
188 Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Troubleshooting
14
14.3 Caravan control system (ATC)
Fault Cause Remedy
Control LED flashes
green (possible to contin-
ue journey)
ATC active
Self test not yet complete
Drive approx. 30 m with
the trailor at a minimum
10 km/h. If the control
LED continues to flash,
contact customer servic-
es
Control LED lights up red
(possible to continue
journey)
ATC not active
Fault in system
Separate the electrical
connection between the
caravan and the towing
vehicle for at least
5 seconds
Reconnect
If the control LED contin-
ues to light up red, con-
tact customer services
Control LED flashes red
(do not continue journey)
ATC brakes Separate the electrical
connection between the
caravan and the towing
vehicle for at least
5 seconds
Reconnect
If the control LED contin-
ues to flash red, perform
a visual check in accord-
ance with the manufac-
turer's instruction manual
and, if necessary, reset
the braking system
Control LED does not illu-
minate (only possible to
continue journey after
test)
ATC without power (only
possible to continue jour-
ney after test)
Connect the electrics be-
tween the caravan and
the towing vehicle
LED defect Connect the electrics be-
tween the caravan and
the towing vehicle
If the control LED still
does not illuminate, per-
form a visual check in ac-
cordance with the
manufacturer's instruc-
tion manual and contact
customer service

Table of Contents

Related product manuals