Safety Notices
ROHS Compliance
The C7000-C Series of Battery Analyzer complies with the European Union’s Directive 2002/95/EC,
Restrictions of Hazardous Substances (RoHS)
Radio Interference
This equipment generates, uses and radiates radio frequency energy. If the equipment
is not installed and used in accordance with the instructions in this manual, it may
cause interference with radio communications. The equipment has been tested and
found to comply with the limits for a Class “A” digital device pursuant to Subpart B of
Part 15 of the FCC Rules, which are designed to provide reasonable protection against
such interference when operated in a commercial environment. Operation of this
equipment in a residential area may cause interference, in which case the user is
required to take whatever measures needed to correct the interference, at their own
expense.
EN55011/EN55022 Warning: This is a Class A product according to
EN55011/EN55022. In a domestic environment, this product may cause radio
interference, in which case the user, at their own expense, may be required to take
adequate corrective measures.
The equipment is designed with adequate safeguards to protect the user from shock
and other hazards when used as specified within this document. If the equipment is
used in a manner not specified by this documentation, the protection provided by the
equipment may be impaired. Please read the documentation and equipment labeling
before using the equipment.
The analyzer may be affected by interference from other devices. If the unit is running
abnormally, please ensure that the analyzer is moved away from any source of radio
interference.
To Next Page
Loading...
Need help?
General