Cadex Electronic C7000-C Series User Manual

Cadex Electronics Inc. C7000-C Series Battery Analyzers .
78
Manually Print Reports and Labels
By default, the analyzer prints battery labels or battery service reports manually. Print the
report before removing the battery. Once the battery is removed, service data is deleted
from the analyzer and cannot be recovered. If service data needs to be kept, BatteryShop
is recommended.
Note Make sure the printer or a label printer is connected to the analyzer and it is
working (see Connecting to BatteryShop or a Printer, page 63).
Tip Reports and labels can be printed through the menu under PRINT UTILITIES.
Print a battery service report
1. Perform the required service on the battery. Do not remove the battery from
the adapter.
2. Press PRINT.
3.
Press the station key of the station that contains the battery.
4.
Press 5 or 6 to scroll to
BATTERY SERVICE REPORT
.
5.
Press
ENTER
.
Print an adapter setup report
1. Press PRINT.
2.
Press the station key of the station that contains the battery.
3.
Press 5 or 6 to scroll to
ADAPTER SETUP REPORT
.
4.
Press
ENTER
.
Print a system setup report
1.
From the global display, press
MENU
.
2.
Press 5 or 6 to scroll to
PRINT UTILITIES
and press
ENTER
.
3.
Press 5 or 6 to scroll to
SYSTEM SETUP REPORT
and press
ENTER
.

Cadex Electronic C7000-C Series Specifications

General

Brand	Cadex Electronic
Model	C7000-C Series
Category	Measuring Instruments
Language	English