Cadex Electronic C7000-C Series User Manual

Cadex Electronics Inc. C7000-C Series Battery Analyzers .
68
7. Press
ESC
twice to return to the global display.
To change the password
1.
From the global display, press
MENU
.
2.
Press 5 or 6 to scroll to
SYSTEM SECURITY
and then press
ENTER
.
3.
Press 5 or 6 to scroll to
CHANGE PASSWORD
and then press
ENTER
.
4. Enter the old password using the number pad and then press ENTER.
5. Enter the new password, and then press ENTER.
6.
Enter the new password again to confirm and then press
ENTER
.
The message
PASSWORD ACCEPTED
appears on the display if the password change was
successful.
7.
Press
ESC
twice to return to the global display.
If the password is lost, contact Cadex Technical Support at 1 800 565-5228 ext. 315 with
your company name and the serial number of the Cadex analyzer.
Program Parameters
There are a number of settings available that affect the way the Cadex analyzer functions
in most or all of its programs.
Starting Battery Service
By default, when a battery is inserted into the Cadex analyzer, the analyzer prompts to
verify the C-Code before service starts. This verification can be turned off so users can run
a battery service as soon as a battery is inserted as follows:
•
The Cadex analyzer asks for Battery ID number and asks to verify C-Code settings.
• The Cadex analyzer asks for Battery ID number only.
•
The Cadex analyzer asks to verify C-Code settings only (default).

Cadex Electronic C7000-C Series Specifications

General

Brand	Cadex Electronic
Model	C7000-C Series
Category	Measuring Instruments
Language	English