Cadex Electronic C7000-C Series - Create or Edit a C-Code

55
5. Press
5
or
6
or use the keypad to enter the desired target value.
6.
Press
ENTER
.
7.
Press 5 or 6 to scroll to
YES
to accept changes and press
ENTER
.
8.
Press
ESC
twice to return to the global display.
Create or Edit a C-Code
1.
From the global display, press the station key.
2.
Use the 5 or 6 key to scroll to an empty C-Code or to the C-Code to edit.
An empty C-Code contains no battery chemistry (
TYPE
) and
VOLTS
and mAh are set to 0.
3.
Press
EDIT
.
4.
Select the program to run:
a) Press 5 or 6 to scroll to the basic program to run.
b) Press 4 to select the program and move to
TARGET
.
Or
a) Press 5 or 6 to scroll through the basic programs to
ADVANCED
.
b) Press 4.
c) Press 5 or 6 to scroll to the advanced program to run.
d) Press 4 to select the program and move to
TARGET
.
At any time from this point, press
ENTER
to save the changes.
5.
Press 5 or 6 or use the keypad to enter the required target capacity (see
Target Capacity, page 43).
6.
Press 4 to move to
TYPE
.
7.
Press 5 or 6 to scroll to the appropriate battery chemistry for the C-Code.
8. Press 4 to move to
VOLTS
.
9. Press
5
or
6
or use the keypad to enter the voltage (
VOLTS
) of the battery
to be serviced (see Battery Voltage (Volts), page 43).