Cadex Electronic C7000-C Series - Managing C-Codes

Cadex Electronics Inc. C7000-C Series Battery Analyzers .
54
Managing C-Codes
If the
ASK FOR BATTERY C
-
CODE
option is set to
YES
, the desired C-Code must be selected and
the appropriate parameters entered before a battery is inserted or before battery
processing begins (see To set the user input required by the Cadex analyzer before
battery service begins, page 69).
Select a C-Code
1.
From the global display, press the station key.
2.
Press 5 or 6 to scroll to the C-Code to select.
3. Press
ENTER
.
4. Press
5
or
6
to scroll to
YES
to accept changes and press
ENTER
.
5.
Press
ESC
twice to return to the global display.
The “*” appears beside the C-Code number on the display to indicate that the C-Code is
active.
Display a C-Code
1.
From the global display, press the station key.
2.
Use the 5 or 6 key to scroll to the C-Code to display. Basic C-Code
parameters appear on the same screen.
3.
Press 3 or 4 to scroll through the extended C-Code parameters.
4. After viewing the C-Code parameters, press
ESC
once or twice to return to the
global display.
Change Target Capacity or Program
1.
From the global display, press the station key.
2.
Press
EDIT
.
3. Press
5
or
6
to scroll to the desired program.
4.
Press 3 or 4 to move to the target capacity field.