Chapter 5
Battery Service Programs
The Cadex analyzer comes with four basic programs, nine advanced programs and four
custom programs. These programs measure the battery state of health (SoH), the
battery’s capacity and find any anomalies that may affect battery performance. If the
battery passes the Auto, Prime or Charge service programs, the battery can stay on the
charger and stay fully charged until it is used. If the battery fails, the program terminates
with the appropriate fault code.
Basic Programs
The basic programs are Auto, Charge, Prime, and QuickSort (for 16K Battery Adapters
only). These programs cannot be edited. Each program performs functions for different
purposes:
Program
Does this
Is used for this
Auto
Exercises batteries to maintain
optimum performance. If the
Target Capacity cannot be
reached, the battery is
reconditioned.
• Restoring batteries affected by
“memory”.
• Performing routine battery
maintenance.
• Identifying marginally performing
batteries.
• Servicing batteries in unknown
condition.
• Verifying battery condition for
warranty claim.
Charge
Applies fast charge only. No
capacity readings are taken
and no discharge is applied.
• Charging batteries quickly.
• Topping up partially discharged
batteries.
To Next Page
Loading...
Need help?
General