Cadex Electronic C7000-C Series User Manual

57
5. Press
4
or
3
to move the cursor between character positions within the
setup name. There are ten positions available.
6.
Press
ENTER
.
7.
Press 5 or 6 to scroll to
YES
to accept changes and press
ENTER
.
8.
Press
ESC
twice to return to the global display.
Reset Extended C-Code to the Default settings
1.
From the global display, press the station key.
2.
Use the 5 or 6 key to scroll to the C-Code.
3.
Press
FN
and then press 1.
4. Press 5 or 6 to scroll to
YES
to accept changes and press
ENTER
.
5.
Press
ESC
twice to return to the global display.
(see Default Extended C-Code Settings, page 51).
Delete a C-Code
1.
From the global display, press the station key.
2.
Use the 5 or 6 key to scroll to the C-Code.
3. Press
FN
and then press 0.
4. Press 5 or 6 to scroll to
YES
to accept changes and press
ENTER
.
5. Press
ESC
twice to return to the global display.
Copy a C-Code (including QuickTest matrix)
1. Ensure both adapters are inserted in the Cadex analyzer. Neither adapter
should contain a battery. The source adapter (the adapter with the C-Code
to be copied) can also be the target adapter (the adapter that will receive
the copied C-Code.)
2.
From the global display, press the station key for the source adapter.
3. Use the
5
or
6
key to scroll to the C-Code.

Cadex Electronic C7000-C Series Specifications

General

Brand	Cadex Electronic
Model	C7000-C Series
Category	Measuring Instruments
Language	English