MAINTENANCE PROCEDURES
Brakes
Brake Fluid Reservoir Level
Verification
With vehicle on a level s urfa ce, check
brake fluid in reserv oir for proper level.
Brake fluid l evel should be between
MIN. and MAX. marks.
219002066-032
1. Brake fluid reservoirs
2. MAX
3. MIN
NOTE: A low level may indicate leaks
or worn brake pads.
Adding Brake Fluid
Clean filler c ap before removing.
Add fluid as required. Do not overfill.
NOTE: Ensure fill er cap diaphragm is
pushed inside the c a p before closing
the brake fluid r es ervoir.
Recommended Brake Fluid
Always us e brake flui d meeting the
specification DOT 4 only.
WARNING
To avoid serious damage to the
braking system, do not use fluids
other than the recommended one,
nor mix different fluids for topping
up.
Brake Inspection
The brake inspection, maintena nc e
and repa ir should be perform ed by
an authorized Can-Am dealer, a repair
shop or person of your choosi ng.
However, verify the follow in g between
visits to you r de aler:
– Brake fluid level
– Brake system for fluid leaks
– B rake pad w ea r
– Brake cleanliness.
WARNING
The brake fluid replacement or
brake system maintenance and
repairs should be performed by an
authorized Can-Am dealer.
Seat Be lts
Seat Belt Cleaning
To clean dirt a nd debris from the seat
belts, sponge the straps with mild soap
and water. Do not use bleach, dye, or
househ old detergents.
WARNING
Do not use pressure washer to
clean seat belt components. Use
of pressure washer can perma-
nently damage seat belt compo-
nents.
Cage
Cage Fasteners
Tighten cage fasteners to specification
periodically.
Remove trim to get access to the fas-
teners.
______________
145
To Next Page
Loading...
Need help?
General
