EQUIPMENT
tmo2016-010-160_a
1. Side net adjustment locations
2. Shoulder guard
8) Should er Guards
The vehicl e is equipped with s houlder
guards to help restra in the entire body
of dri ve r and pa s s engers inside vehi-
cle.
9) Seat Belts
This vehicle is equipped with 3 points
seat be lts to help prote ct driver and
passengers in the event of a collision,
rollover, or tipover. The seat belts can
help keep occupa nts stay in the pas-
senger compa rtm ent.
WARNING
Wear seat belts properly at all
times. Seat belts reduce the
risk of injury in a crash and help
keep limbs inside the cockpit in a
rollover or any accidents.
If dri ve r's seat belt is not fastened
when:
– The igni tion is turn ON, th e seat belt
indi cator lamp will flash.
– The engine is s ta rte d a nd shift
lever is moved out of PARK, vehicle
speed wil l be limited to a ma xim um
of approxima tely 20 km/h (12 MPH)
on flat ground .
WARNING
The vehicle may reach higher or
lower speed depending on in-
clines.
To remind you to fasten the seat belt,
the multifunction gauge will display the
following message: ENGINE LI MI TA -
TION ENGAGED FASTEN SEAT B ELT.
WARNING
There is no indicator light or mes-
sage for the passengers seat belts.
The driver is responsible for the
passengers safety and should en-
sure the passengers buckles their
seat belts.
Fastening and Adjusting the Seat
Belt
The seat belt is equip ped with a semi-
cinching tab that l oc k the lap belt when
the webbing is under tens ion.
tmr2014-037-005_a
TYP ICAL
1. Semi-cinching tab
To fasten the seat belt, insert the latch
plate into th e buc k le, then pull the belt
to e nsure it is properly fastened.
Adjust the s ea t belt tightly against your
body by pulling the shoul der belt up-
wards.
92
______________
To Next Page
Loading...
Need help?
General
