EQUIPMENT
219001955-004_a
Step 1: Apply and hold br ake pedal
Step 2: Lift lever
NOTE: The brake holdi ng mechanism
lever can be set to several positions.
WARNING
When the brake holding mech-
anism is applied, make sure the
vehicle stays securely in place.
Always put the shift lever in Park
when using the brake holding
mechanism.
To release the brake hold ing mecha-
nism, sim ply apply and ho ld the brake
pedal, put shift leve r in gear then re-
lease brake pedal. When relea se d it
should return to the rest posi tion.
Safe usage of the brak e holdin g m ec h-
anism requires the shi ft lever to be
set to the Park position. I t is not rec-
ommended to use the brake holding
mechanism on its own.
WARNING
Make sure brake holding mecha-
nism is released before operating
the vehicle. If the brake holding
mechanism is left ON while riding,
it may cause damage to the brake
system and lead to loss of braking
capacity and/or fire.
25) Side Mirrors (On
app licable m odels)
This vehicle may be equipped with side
mirrors.
The mi rrors can be adjusted to suit
driver preferences.
WARNING
Do not adjust mirrors while riding.
You could lose control.
26 ) Full D oors Wit h E le ctric
Windows (Limited
Models)
This vehicle comes equipped with ful l
doors and electric w indows.
tmo2016-010-082_a
1. Outer door handle
219002066-012
1. Inner door handle
Doors can be removed from vehicle.
See an authorized Can-Am dealer for
information.
WARNING
Always install safe
ty nets when-
ever removing full doors from ve-
hicle. See an authorized Can-Am
dealer for instal
lation instructions.
_______________
97
To Next Page
Loading...
Need help?
General
