MAINTENAN CE SCHEDULE
– Riding on dry dirt covered surfaces
– R iding on dry gravel roa ds or similar conditions.
NOTE: Riding in a group in these conditions would increase even m ore the air filter
maintenance.
MAIN TENANC E SCHEDULE LEGEND
Operation i n t rail riding conditions
Operation in severe riding conditions ( dusty or muddy) or carrying heavy loads condition
MAINTENANC E SCHE DUL E
Make sure to perform proper maintenance a t recommended intervals as indicated
in the tabl es . Some items of the maintenance schedule must be performed in
function of the calendar, regardless of the distance or time of o pera tion.
EVERY YEAR OR EVERY 3 000 KM (2,000 MI) OR 200 HOURS
(whichever comes first)
EVERY YEAR OR EVERY 1 500 KM (1,000 MI) OR 100 HOURS
(whichever comes first)
Check fault codes
Perform all items indicated in the pre-ride inspection.
Replace engine oil and filter
Inspect gearbox oil level and look for contam ination (every 3000 km)
Replace gearbox oil ( Perform at the first 3000 km)
Inspect and clean engine air filter. Replace if needed
Inspect steering system for abnormal play and damages (colum n, rack and pinion,
bellows)
Inspect the tie rod ends and ball joints for play and inspect bellows condi tion
Inspect w heel bearings for abnorm al play
Inspect shock absorber bushings, suspension arm bushings and wear plates. Replace
if needed.
Inspect CV joints and rubber bellows condition (check for abnormal play in the joints and
for cuts in the rubber bellows)
Lubricate suspensi on arms and stabilizer bar bushings
Inspect and clean the brake system (fluid level, pads, discs, lines, calipers)
Check front differential oil level and look for contamination and overall condition (vents,
mount bolt torque, seals)
Inspect battery condition and connections
Inspect propeller shaft U-joints for abnormal play.
______________
117
To Next Page
Loading...
Need help?
General
