TROUBLESHOOTING GUIDELINES
CVT BELT IS SLIPPING
1. Water has entered in the CVT.
– Refer to SP ECIAL PRO C EDURE S.
"--" IS DISPLAYED ON GEARBOX POSITION DISPLAY (MULTIFUNCTION GAUGE)
1. Shift lever is between 2 positions.
– Properly position the shift lever in the desired position.
2. Shift lever is not properly adjusted.
– Conta ct an authoriz ed Can-Am dealer.
3. Electrical communication error.
– Conta ct an authoriz ed Can-Am dealer.
ENGINE DOES NOT TURN
1. Ignition switch is in the OFF position.
– Place switch to ON position.
2. Shift lever is not set on PARK or NEUTRAL.
– Set shift le ver to ei ther in PA R K or in NEUTRAL or press the brake pedal.
3. Burnt fuse.
– Chec k fuses.
4. Weak battery or loose connections.
– Check charging system fuse.
– Check fault message in cluster.
– Check battery co nnec tions a nd term inals conditio n.
– Have the battery c hecked by an a uthorized Can-Am dealer.
5. Defective starter solenoid.
– Conta ct an authoriz ed Can-Am dealer.
168
______________
To Next Page
Loading...
Need help?
General
