PRE-RIDE INSPECTION
Always inspect and confirm the safe opera ting c onditi on of your v ehicle prio r to
ride. Alw ays follow the maintenance schedule described in this Operator's Guide.
WARNING
Perform a pre-ride inspection before each ride to detect any potential prob-
lem thatcould occur during operation. The pre-ride inspection can help you
monitor component wear and deterioration before they become a problem.
Correct any problem that you discover to reduce the risk of a breakdown or
crash.
Before using this ve hicle, the operator should a lw a y s perform the following
pre-ride inspec tion chec k list.
Refer to
MAINTE NANCE PROCEDURES
for details.
Pre-Ride Inspection Check List
What to Do Before Starting the Engine (Key OFF)
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Tires
Check tire pressure and condition. Refer to
SPECIFICATIONS
and adjust according to load.
Wheels
Check wheels for damage and f or abnormal play, Make
sure that lug nuts are tightened. Refer to
WHEELS AND
TIRES
in
MAINTENANCE PROCEDURES
for torque
specification.
Radiator
Check cleanliness of the radiator.
Front grill kit Inspect front grill kit for cleanliness.
Engine oil Check engine oil level .
Coolant Check coolant level.
Brake fluid
Check brake fluid level.
Engine air fil ter
Inspect the engine air filter, clean or replace if needed
(service more often when riding i n dusty conditions).
CVT air filter
Inspect and cl ean the CVT air filter (when riding in dusty
conditions).
Drive shaft bellow s Check drive shaft bel lows and protectors condition.
14
_______
SAFETY IN FORM ATION
________
To Next Page
Loading...
Need help?
General
