COPIER (Service mode for printer) > OPTION (Specification setting mode) > BODY
SDTM-DSP Auto shutdown menu display setting
Detail To set whether to display automatic shutdown menu.
Use Case
When switching display/hide of the automatic shutdown
Adj/Set/Operate Method
Enter the setting value, and then press OK or Apply key.
Display/Adj/Set Range
0/1
0: Hide the menu
1: Display the menu
Default Value
Except for Europe: 0
Europe: 1
Additional Functions
Mode
Menu > Timer Settings > Auto Shutdown Time
WLANPORT For R&D use
SSLSTRNG Allow weak encryption algorithm for SSL
Detail To set whether to permit the use of weak cryptographic algorithms in SSL.
When set to "1", weak cryptographic algorithm is not allowed to use.
Use Case
To allow the use of weak cryptographic algorithm:
Adj/Set/Operate Method
1) Enter the setting value, and then press OK or Apply key.
2) Turn OFF/ON the main power.
Display/Adj/Set Range
0/1
0: Allow weak cryptographic algorithm
1: Do not allow weak cryptographic algorithm (secure mode)
Default Value
1
CLP-DSP Cartridge log print menu display setting
Detail To set whether to display the cartridge log printing menu.
Use Case
To set display/hide of the cartridge log printing menu
Display/Adj/Set Range
0/1
0: Hide the menu
1: Display the menu
Default Value
1
Additional Functions
Mode
SADF: Menu > Output Reports > Cartridge Log Report
DADF: Menu > Output Rprt. > Print List > Cartridge Log Report
■ ACC
COPIER (Service mode for printer) > OPTION (Specification setting mode) > ACC
WLAN Wireless LAN function setting
Detail To set whether to enable the wireless LAN function.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK or Apply key.
2) Turn OFF/ON the main power.
Display/Adj/Set Range
0/1
0: Disable
1: Enable
Default Value
1
Supplement/Memo
Wireless LAN supported model only
WLANMODE For R&D use
WLANSERIAL For R&D use
8. Service Mode
259
To Next Page
Loading...
