Canon imagePROGRAF iPF6400 User Manual

Driver Matching Mode
The following options are available when you select Driver Matching Mode in the A Matching Mode list.
• A Matching Mode
Select the color matching mode to use, as desired.
Normally, select Driver Matching Mode. For color matching based on ICC profiles, select ICC Matching Mode or
Host ICM Mode, depending on your color matching system.
• B Matching Method
Select the color matching method that suits the document to be printed. Various Matching Method options are
available depending on your selection in Matching Mode.
• C Color Space
Select the applicable color space as desired.
•
D Monitor White Point
Enter the color temperature set on the monitor.
Displayed when the B Matching Method is set to Monitor Matching.
• E Gamma
You can adjust the gradation of intermediate tones in an image.
2.2 is normally selected. If you want a softer impression than 2.2, select 1.8.
Matching Sheet (Windows)
iPF6400
User's Guide
Windows Software Printer Driver
192

Canon imagePROGRAF iPF6400 Specifications

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO
Maximum print size	-
Maximum roll length	18 m
ISO A-series sizes (A0...A9)	A1, A2
ISO B-series sizes (B0...B9)	B2
Internal memory	384 MB
Sound pressure level (printing)	47 dB
Power supply	100 W
Power consumption (off)	5 W
Power consumption (standby)	6 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
USB port	No
USB 2.0 ports quantity	0